[64studio-devel] Upgrade to Lenny problem

[Jaromír Mikeš]

Hi Dave,

thanks a lot. Your advice was right like always. Hope you are fine.
Know I am fighting with xorg.conf.. there are not legacy nvidia drivers in Lenny.
I would like to get better resolution then "1024x768" I by accident skip choosing "1600x1024" (my win setting) during installation.
Even if I putting "1600x1024" in my xorg.conf I can't get it.


Cheers

mirami

PS:Sorry for double post


< ------------ Původní zpráva ------------
< Od: dave <drbudo at ntlworld.com>
< Předmět: Re: [64studio-devel] Upgrade to Lenny problem
< Datum: 07.6.2008 22:05:26
< ----------------------------------------
< Hi mirami,
<
< Jaromír Mikeš wrote:
< > Hello,
< >
< > after some troubles I was going through upgrade process. There was no broken
< packages, everything installed. I had to remove qsynth some problems during
< upgrade. I also noticed that legacy drivers for my GeForce MX 400 not are
< available in Lenny.
< >
< > The problem is that after log in I have no panel, no menu. I was able launch
< Iceweasel just from terminal because I have short cut for launching it
< (terminal). I can see just clean default grey/blue background even I had
< set-uped different color. No documents or shorts even I had few on it.
< >
< > This behavior is same with both kernels with new and old two.
< >
< > Thanks for any help/advice
< >
< > mirami
< >
< > _______________________________________________
< > 64studio-devel mailing list
< > 64studio-devel at 64studio.com
< > http://lists.64studio.com/mailman/listinfo/64studio-devel
< >
< >
<
< mirami
<
< go to a terminal and type:
<
< # apt-get install gnome-core metacity
<
< you need these to get your desktop back.
< If it wants to remove packages, say no, and post back.
< " that's some list you've got there".
<
< Good luck,
< dave.
<
<
<
<
<
<
<
< _______________________________________________
< 64studio-devel mailing list
< 64studio-devel at 64studio.com
< http://lists.64studio.com/mailman/listinfo/64studio-devel
<
<
<