[64studio-devel] HP nc6320 laptop boot and USB problem

[Chris]

I installed 1.4 64bit and it boots, haven't tested usb, wireless doesn't 
work.

Chris

Chris wrote:
> Hi, I hope I am not in the wrong place.
> 
> I've installed 64studio version 1 on this laptop. Installation appeared 
> to go ok
> but I think the machine fails to find the hard disk and after a long 
> delay (2
> minutes -ish) boots to a minimal system in memory. To get a dmesg I
> will either have to type it by hand or solve another problem which is 
> that network and USB devices are not recognised. I've at least put
> part of my dmesg below - hand typed so may have errors.
> 
> I tried modprobe with each of the sata_*.ko modules and got output
> similar the dmesg output.
> 
> I'm fairly new to Linux but am used to FreeBSD so I can do unix, I just
> don't know Linux specific commands or ways of doing things.
> 
> So I would appreciate a bit of guidance on getting the machine booting
> or getting a USB pen drive working but I don't know which to work on first.
> 
> Thanks very much for any help
> 
> Chris
> 
> 
> 
> ata1: SATA max UDMA/133 cmd 0xFFFFC20000056100 ctl 0x0 bmdma 0x0 irq 233
> ata2: SATA max UDMA/133 cmd 0xFFFFC20000056180 ctl 0x0 bmdma 0x0 irq 233
> ata3: SATA max UDMA/133 cmd 0xFFFFC20000056200 ctl 0x0 bmdma 0x0 irq 233
> ata4: SATA max UDMA/133 cmd 0xFFFFC20000056280 ctl 0x0 bmdma 0x0 irq 233
> Unable to handle kernel NULL pointer dereference at 0000000000000000 RIP:
> <ffffffff8035b60e>{make_class_name+34}
> PGD 3d824067 PUD 3d825067 PMD 0
> Oops: 0000 [1] PREEMPT
> CPU 0
> Modules linked in: ahci libata scsi_mod piix uhci_hcd ehci_hcd generic 
> ide_core ohci1394 iee1394 tg3 thermal processor fan
> Pid: 1689, comm: modprobe Not tainted 2.6.17-1-multimedia-amd64-k8 #1
> RIP: 0010[<ffffffff8035b60e>]
> RSP: 0000:ffff81993df25c78  EFLAGS: 00010296
> RAX: 0000000000000000 RBX: fffffffffffffff4 RCX: ffffffffffffffff
> RDX: ffff81003eae10c0 RSI: ffffffffffffffff RDI: 0000000000000000
> RBP: ffff81003dbd6500    R08: 0000000000000000    R09: ffffc20000200000
> R10: ffff81003dce4e40 R11: ffffc20000801000 R12: ffffffff881004a8
> R13: ffffffff88100360    R14: 0000000000000000 R15: 0000000000000000
> FS:  00002af1802376d0(0000) GS:ffffffff804fd000(0000) knlGS:0000000000000000
> CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
> CR2: 0000000000000000 CR3: 000000003da10000 CR4: 00000000000006e0
> Process modprobe (pid: 1689, threadinfo ffff81003df24000, task 
> ffff81003eae10c0)
> Stack: ffff81003dce4e40 ffffffff8028c9cc ffff81003dce4e40 ffff81003dbd6500
>         ffffffff88100498 ffffffff8035b857 ffff81003dbfc9c0 ffff81003dbd6500
>         ffff81003dbd6000 ffff81003ddfa800
> Call Trace:
>         <ffffffff8028c9cc>{rt_down+21}
>         <ffffffff8035b857>{class_device_del+150}
>         <ffffffff8035b930>{class_device_unregister+9}
>         <ffffffff880dca2e>{:scsi_mod:scsi_remove_host+232}
>         <ffffffff88103c0f>{:libata:ata_host_remove+16}
>         <ffffffff88106e04>{:libata:ata_device_add+1423}
>         <ffffffff881182b8>{:ahci:ahci_init_one+1774}
>         <ffffffff80305354>{pci_device_probe+76}
>         <ffffffff8035afbd>{driver_probe_device+82}
>         <ffffffff8035b059>{__driver_attach+70}
>         <ffffffff8035b013>{__driver_attach+0}
>         <ffffffff8035aa9b>{bus_for_each_dev+67}
>         <ffffffff8035a581>{bus_add_driver+129}
>         <ffffffff803054ea>{__pci_register_driver+84}
>         <ffffffff8028e1cf>{sys_init_module+167}
>         <ffffffff80258b4e>{system_call+126}
> 
> 
> Code: f2 ae 48 8b 85 a0 00 00 00 48 89 ca 48 89 f1 be d0 00 00 00
> RIP <ffffffff8035b60e>{make_class_name+34} RSP <ffff81003df25c78>
> CR2: 0000000000000000
> 
> ***The following line is on screen but not in dmesg***
> udevd-event[1689]: run_program: '/sbin/modprobe' abnormal exit
> ***The following line is on screen and in dmesg***
>   <6>hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, DMA
> 
>   Uniform CD-ROM driver Revision: 3.20
>   Probing IDE interface ide1...
>   usb 2-4: new high speed USB device using ehci_hcd and address 6
>   usb 2-4: configuration #1 chosen from 1 choice
>   Initialising USB Mass Storage driver...
> 
> 
> 
> 
> _______________________________________________
> 64studio-devel mailing list
> 64studio-devel at 64studio.com
> http://lists.64studio.com/mailman/listinfo/64studio-devel
> 
>