[64studio-devel] 64studio 1.4.0 not booting properly after installing from a cd

[Tuukka Jääskeläinen]

cat /proc/partitions

8 0 sda
8 1 sda1
8 16 sdb

How can it be, that there is no sdb1? Where did the installer install all
those files?

2007/7/6, Free Ekanayaka <free at 64studio.com>:
>
> Hi,
>
> |--==> Tuukka Jääskeläinen writes:
>
>   TJ> cat /proc/cmdline
>   TJ> root=3D/dev/sdb1 ro vga=3D791 splash=3Dsilent
>
>   TJ> ls /dev/hd*
>   TJ> /dev/hde
>
>   TJ> ls /dev/sd*
>   TJ> /dev/sda /dev/sda1 /dev/sdb
>
> Mmh it seems a different problem than the device naming issue that we
> observed a while a go. Your second hard drive seems to be correctly
> detected (/dev/sdb) but no partitions are found on it (no /dev/sdb1 or
> similar). This probably means some problem in the partition table or
> in the BIOS.
>
> Please can you copy also the output of
>
> cat /proc/partitions
>
> ?
>
> You can just copy the name column, the number are not important here.
>
>   TJ> There's all I got, hope it helps. Took me a while to write it all
> down. :)
>
> I can imagine, thanks a lot for your report!
>
> Ciao,
>
> Free
>



-- 
- Tuukka J. / 50% of Tripteaser / 50% of Solarians
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.64studio.com/pipermail/64studio-devel/attachments/20070706/c202ab53/attachment.htm