[64studio-devel] 64studio 1.4.0 not booting properly after installing from a cd

[Free Ekanayaka]

Hi,

|--==> Tuukka Jääskeläinen writes:

  TJ> cat /proc/cmdline
  TJ> root=3D/dev/sdb1 ro vga=3D791 splash=3Dsilent

  TJ> ls /dev/hd*
  TJ> /dev/hde

  TJ> ls /dev/sd*
  TJ> /dev/sda /dev/sda1 /dev/sdb

Mmh it seems a different problem than the device naming issue that we
observed a while a go. Your second hard drive seems to be correctly
detected (/dev/sdb) but no partitions are found on it (no /dev/sdb1 or
similar). This probably means some problem in the partition table or
in the BIOS.

Please can you copy also the output of

cat /proc/partitions

?

You can just copy the name column, the number are not important here.

  TJ> There's all I got, hope it helps. Took me a while to write it all down. :)

I can imagine, thanks a lot for your report!

Ciao,

Free