[64studio-devel] 64studio 1.4.0 not booting properly after installing from a cd

[Tuukka Jääskeläinen]

2007/7/3, Daniel James <daniel at 64studio.com>:
>
> Hi Tuukka,
>
> > The cd seemed to
> > install properly, but after I boot up, it says the following (these are
> the
> > last lines when pressed F2):
> >
> > Begin: Waiting for root file system... ...
> > Done.
> >          Check root= bootarg cat /proc/cmdline
> >          or missing modules, devices: cat /proc/modules ls /dev
> > ALERT! /dev/sdb1 does not exist. Dropping to a shell!
>
> It sounds like you might be suffering from the SATA bug in 1.4.0, where
> /dev/sdb1 sometimes gets confused with /dev/hdb1 - it's been tricky to
> pin down.
>
> Please try the freshly-baked master install image:
>
> http://cdd.64studio.com/releases/64studio/64studio_master_amd64.iso
>
> http://cdd.64studio.com/releases/64studio/64studio_master_amd64.iso.md5sum
>
> and let us know if you still have the problem.
>
> Cheers!
>
> Daniel
>

About that bug, I presume that it's not it, because when typing ls /dev I
can't find neither /dev/sdb1 OR /dev/hdb1. If the bug is that this is
accidentally mislabeled, I bet one of those should be in there. Or have I
misunderstood something?

-- 
- Tuukka J. / 50% of Tripteaser / 50% of Solarians
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.64studio.com/pipermail/64studio-devel/attachments/20070704/ede05e15/attachment.htm