[64studio-devel] 64studio 1.4.0 not booting properly after installing from a cd

[Daniel James]

Hi Tuukka,

 > The cd seemed to
> install properly, but after I boot up, it says the following (these are the
> last lines when pressed F2):
> 
> Begin: Waiting for root file system... ...
> Done.
>          Check root= bootarg cat /proc/cmdline
>          or missing modules, devices: cat /proc/modules ls /dev
> ALERT! /dev/sdb1 does not exist. Dropping to a shell!

It sounds like you might be suffering from the SATA bug in 1.4.0, where 
/dev/sdb1 sometimes gets confused with /dev/hdb1 - it's been tricky to 
pin down.

Please try the freshly-baked master install image:

http://cdd.64studio.com/releases/64studio/64studio_master_amd64.iso

http://cdd.64studio.com/releases/64studio/64studio_master_amd64.iso.md5sum

and let us know if you still have the problem.

Cheers!

Daniel