[64studio-devel] ADAT SoundCard and 64studio

[Quentin Harley]

Blue Eye wrote:
> Hello
>
> Any one using 64Studio with an ADAT card ?
>   
Yes, I use the RME "Hamerfall" 9636 card.  Supposed to be the "budget" 
card - It is a 16ch in and out device (two banks) and has excellent 
Linux support.  It can handle 96kHz and full duplex.  I have a AMD64x2 
+3800 system, and I do real time effects and run jammin in real time @ 
44100Hz, once with 2.5ms of latency as a test..  Although this was risky 
(I use 5ms for live) I had no xruns, and the sound was great.

Sorry to hear about your hardware being dropped :-(

Quentin
> After facing several troubles, I contacted the man who designed the 
> Linux Alsa Driver for my Sek'd Prodif+ sound card which was my adat card 
> under windows. He told me that he drop the developement of the driver, 
> that however is listed as supported by Alsa. The part concerning ADAT 
> I/O is indeed not implemented.
>
> So I must change my ADAT card to have my set up fully working...
>
> I wish I could have no problem for installing this ADAT device, so I 
> depend upon your experience. If you are using a ADAT card compatible 
> with Linux that you've installed easily... please let me know which one.
>
> Thanx
>
>
>
>
>
>
>
> _______________________________________________
> 64studio-devel mailing list
> 64studio-devel at 64studio.com
> http://lists.64studio.com/mailman/listinfo/64studio-devel
>
>
>