[64studio-devel] Re: RME Multiface II

[Daniel James]

Hi Cezar,

 >   I also
>   tried to set the PCI BUS to 0a:0:0 instead of 10:0:0 and I get
>   "incorrect format".

That's because x.org doesn't like the ID in hex format; the 0a 
represents the number 10.

>   Without the  pci=assign-busses on the kernel line, my RME is not
>   seen in /proc/asound/cards thos the red led on it's front panel
>   stops blinking.

Hmmm, it seems that your Hammerfall is sharing IRQ 11 with your video 
card, according to your lspci output. The output of cat /proc/interrupts
will show what's sharing interrupts with what.

I suggest going into your BIOS setup, disabling all hardware devices you 
don't need, then seeing if you can move some of the interrupts around 
until both the nVidia video chipset and Hammerfall have an interrupt to 
themselves.

Failing that, we will have a 2.6.18 kernel in the next release candidate 
- that may help with the original pcmcia bug.

Cheers!

Daniel