[64studio-devel] 0.9.7 soundcard problems

[Arthur]

Hi,

I've had problems with my onboard soundcard. It's disabled in the system 
bios but debian insists on loading the drivers for it. I was able to 
keep it from loading in debian64 etch by adding via82_cxxx and 
snd_via82xx to /etc/discover.d/linux-sound-base_noOSS but this doesn't 
seem to work in 64studio.

On the initial boot I get this:

a at 64studio:~$ cat /dev/sndstat
Sound Driver:3.8.1a-980706 (ALSA v1.0.13 emulation code)
Kernel: Linux 64studio 2.6.18-2-multimedia-amd64 #1 SMP PREEMPT Fri Nov 
10 15:42 :09 UTC 2006 x86_64
Config options: 0

Installed drivers:
Type 10: ALSA emulation

Card config:
M-Audio USB Uno MIDI Interface at usb-0000:00:10.1-2, full speed
VIA 8237 with AD1980 at 0x1000, irq 3
M Audio Delta 44 at 0xc400, irq 11

Audio devices:
1: VIA 8237 (DUPLEX)
2: ICE1712 multi (DUPLEX)

Synth devices: NOT ENABLED IN CONFIG

Midi devices:
0: USB Uno MIDI Interface

Timers:
7: system timer

Mixers:
0: USB Mixer
1: Analog Devices AD1980
2: ICE1712 - multitrac

After a reboot with no changes made, the audio drivers change places:

a at 64studio:~$ cat /dev/sndstat
Sound Driver:3.8.1a-980706 (ALSA v1.0.13 emulation code)
Kernel: Linux 64studio 2.6.18-2-multimedia-amd64 #1 SMP PREEMPT Fri Nov 
10 15:42 :09 UTC 2006 x86_64
Config options: 0

Installed drivers:
Type 10: ALSA emulation

Card config:
M-Audio USB Uno MIDI Interface at usb-0000:00:10.1-2, full speed
M Audio Delta 44 at 0xc400, irq 11
VIA 8237 with AD1980 at 0x1000, irq 3

Audio devices:
1: ICE1712 multi (DUPLEX)
2: VIA 8237 (DUPLEX)

Synth devices: NOT ENABLED IN CONFIG

Midi devices:
0: USB Uno MIDI Interface

Timers:
7: system timer

Mixers:
0: USB Mixer
1: ICE1712 - multitrack
2: Analog Devices AD1980

With the delta 44 in first place it looks like it should work but trying 
to start jack I get this:

14:08:38.670 Patchbay deactivated.
14:08:38.676 Statistics reset.
14:08:38.736 MIDI connection graph change.
14:08:38.886 MIDI connection change.
14:08:46.229 Startup script...
14:08:46.229 artsshell -q terminate
can't create mcop directory
Creating link /home/a/.kde/socket-64studio.
14:08:46.874 Startup script terminated with exit status=256.
14:08:46.874 JACK is starting...
14:08:46.875 jackd -R -dalsa -dhw:0 -r44100 -p1024 -n2
14:08:46.885 JACK was started with PID=3970 (0xf82).
jackd 0.102.20
Copyright 2001-2005 Paul Davis and others.
jackd comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
JACK compiled with System V SHM support.
loading driver ..
apparent rate = 44100
creating alsa driver ... hw:0|hw:0|1024|2|44100|0|0|nomon|swmeter|-|32bit
control device hw:0
ALSA: Cannot open PCM device alsa_pcm for playback. Falling back to 
capture-only mode
cannot load driver module alsa
14:08:46.986 JACK was stopped successfully.
14:08:48.907 Could not connect to JACK server as client. Please check 
the messages window for more info.

Things just keep switching around, if I run alsaconf, my midi goes away. 
Any suggestions would be greatly appreciated.

Thanks,
Arthur